Menu Close

Autel MaxiCOM MK808S Diagnostic Tool With Special Functions


SKU: Autel MaxiCOM MK808S Category: Tag:

Autel MaxiCOM MK808S Car Diagnostic Scan Tool With 36+ Special Functions

The Autel MaxiCOM MK808S is the most cost-worthy Autel scanner up to date, integrates Bi-directional Control, Initial Adaptation, Self-learning or some Auto Detection function, 36+ Services, all system Diagnostics, Digital Inspection, FCA Auto Auth, IMMO Functions, Battery Registration and Reset and etc. Along with intuitive user interface & ultra-portability, MK808S is the perfect companion for DIYers & repair workshops.

ALL AUTEL PRODUCTS LINK: Https://Www.Diatools.Co.Za/Brand/Autel/

Autel MaxiCOM MK808S Car Diagnostic Scan Tool

New Feature- Auto Auth:

  • Autel adds “Auto Auth” new functions on MK808S tablets, enable your Autel tablet to communicate with the FCA SGW Authentication System and bypass the SGM so you can perform diagnostics and Bi-Directional without using a bypass cable. You can obtain these functions with new software package (V2.62 and above) by tapping “Update” icon on your tablets.
  • Active test: Featuring bi-directional control, the Autel car diagnostic scanner MK808S through active tests, this bi-directional diagnostic scanner can precisely locate the car problems, letting you quickly know whether a specific system, component, or subsystem is functioning properly or not.


1) Autel MK808S can access vehicle-specific subsystems and conduct component tests after repairing or replacement to quickly identify whether the repair job works or not.

2) Autel MK808S car scanner can send test commands to the subsystems or components. You can test the integrity of the system or parts by monitoring the operation of the tested parts, Namely:

  • Turn-On/OFF Front and Rear side ACM Solenoid.
  • Turn on the radiator fan.
  • Turning the fuel pump on and off,
  • Oil Pressure Control Test.
  • Inlet and Outlet Valve tests…

Autel MaxiCOM MK808S Car Diagnostic Tool

One-click to Perform Full System Diagnostics:

The automotive diagnostic scanner Autel MK808S, being capable of doing the OE-Level full system diagnostics, any problems that can damage your car are not allowed to hide. After numerous tests, we are sure that diagnostics done by MK808S are as same deep and complete as the OE diagnosis tool of car makes.

Full System Diagnostics: The MK808S is able to diagnostic systems include but not limited to the following systems.

(Both auto scan and individual module scan are supported):

  • Drive: Motor Electronics/ISM-Shift Module/Transmission Control/Exhaust System/Fuel Pump.
  • Chassis: Electric Stability/AMF Drive Unit/Adaptive Damping System/Electric Power Steering/Multifunction Steering Wheel.
  • Body: Supplemental Resistance System/Central Gateway/Electronic Ignition/Steering Column Module/Multifunction Control Unit/Sunroof/Tailgate Control/Weight Sensing System/Headlamp/Rear signal acquisition and actuation module/Trailer recognition module/ Seats and Doors/ Adaptive Directional Headlights/ Convertible Top Module/ Light Switching Centre.
  • Information and Communication: Instrument Cluster/Rear Entertainment system/Navigation/Audio/Sound/Multifunction Camera/Digital Audio Broadcasting/Drive Kit for iPhone/Radio/Diver Assistance System/Park Distance Control.

1.OE-Level Diagnostics: The scanner Autel MK808 can diagnose cars comprehensively and fully without resorting to any other equipment or consulting high-end technicians for guide. The functionality is advanced and complete while the operation process is quite easy.

2. Swift Diagnostics: Being equipped with Cortex-A9 processor, Autel MK808 can access every module quickly and smoothly. You can read the codes, live data and clear the codes in just a few seconds of each individual module. If you choose auto-scan, the whole system diagnosis could be done within just 15-20 seconds.

Autel MaxiCOM MK808S Car Diagnostic Scan Tool Special Functions

36+ Special Functions:

Some commonly used service functions are as follows:

  • Oil Reset: Reset the oil life system and turn off the oil light after replacing the oil or oil filter to start a new cycle.
  • EPB Reset: Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.
  • SAS Calibration Reset: Calibrate the steering angle after replacing the steering angle position sensor and the mechanical parts of the steering system, etc. Stores the current steering wheel position as the straight-ahead position in the steering angle sensor and clear fault memory.
  • BMS Service: Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information and prevent the related control module from detecting false information.
  • TPMS Reset: Quickly look up the tire sensor IDs from the vehicle’s ECU, and perform TPMS replacement and sensor test.
  • ABS Bleeding: Bleed the air of a brake system to restore ABS brake sensitivity.
  • Injector Coding: Code the injector after replacing or adjusting to correct the fuel injection volume of each cylinder more accurately.
  • IMMO Keys: Disable the lost vehicle keys and program a new replacement key fob.
  • Suspension: Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system. And Throttle, WIN DR ROOF, Seats, Odometer, Lang Change, Headlamp, CHG Tire Size, TEC Learn, Trans Adaption, etc.

Autel MaxiCOM MK808S Vehicle Coverage:

Support many US cars after 1992, EU cars after 2002, Asia cars after 2008.

Utilizes new Auto VIN ID Tech to automatically identify the vehicle’s make, model and year.

For Abarth, Acura, Alfa, Audi, Bentley, Benz, BMW, Bugatti, Chrysler, Citroen, Dacia, Daewoo, Daihatsu, Dodge, Fiat, Ford, Ford, GM, GTR, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Lamborghini, Lancia, LandRover, Lexus, LT3, Maruti Suzuki, Maserati, Maybach, Mazda, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Scion, Seat, Skoda, Smart, Sprinter, SsangYong, Subaru, Suzuki, Toyota, Vauxhall, Volkswagen, Volkswagen CV, Volvo.

More Languages Released: English, German, Spanish, Japanese, Portuguese, Dutch, French, Italian. Korean, Russian, Polish, Swedish, Persian, Turkish, Thai, Vietnamese, Hebrew, Arabic, Indonesian.

Support MV105/MV108 Inspection Camera: (Optional)

Autel 105 MaxiVideo Inspection Video Scope is compatible with MK808, maximizing the potential of MK808 to examine and clean difficult-to-reach car areas, such as spark plug holes, engine cylinders, and other small parts, quickly and safely.

Note: The MV105 or MV108 is Optional.

4 methods for Vehicle Identification:

  1. Auto VIN Scan: The MaxiCOM diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECUs and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.
  2. Manual VIN Input: For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.
  3. Automatic Selection: The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.
  4. Manual Selection: When the vehicle’s VIN is not automatically retrievable through the vehicle’s ECU, or the specific VIN is unknown, the vehicle can be manually selected.

Autel MaxiCOM MK808S Remote Technical Support:

By using Remote Desk, users can receive ad-hoc remote support from Autel’s technical engineers, colleagues, or friends, by allowing them to control this tablet device on their PC via the TeamViewer software.

Additional Features:

Shop Manager – You can well manage the workshop information with 3 available functions within this application: Vehicle History, Workshop Information, and Customer Manager. Intuitively look up the summarized details.

Data Manager – The best solution for the data related operations, you can store, print, and review the saved files in Image, PDF, Review Data, Apps Uninstall or Data Logging.

Autel MaxiCOM MK808S Advanced Hardware:

  • CPU: Rock chip RK3566.
  • RAM:4G.
  • ROM:64G.
  • Battery Capacity: 5000mAh.
  • Android Version: Android 11.
  • Screen Size: 7inch.
  • Wifi:2.4 & 5 GHz.
  • VCI: main cable.

Warranty & Update: one-year warranty with one year free online updates and technical support via Official Website: Http://Www.Auteltech.Com/. Updates can improve the MaxiCOM capabilities and application functionality.

Autel MaxiCOM MK808S Packing List:

  1. USB External Power Adapter.
  2. Main cable.
  3. Quick Reference Guide.
  4. Carry case.
  5. Mini USB Cable.
Weight3 kg
Dimensions39 × 31 × 13 cm